What Are the Steps for Cold Storage Installation?

What are the steps for cold storage installation? If the installation steps are not followed correctly, failures are likely to occur later. From site selection and leveling to power-on and commissioning, what are the key stages? We have outlined the standard process for you to avoid installation pitfalls!

What are the steps for cold storage installation? The construction and installation of a cold storage project is a systematic project, mainly divided into the installation of storage panels, air coolers, refrigeration equipment, refrigerant piping, electrical control systems, and commissioning. Before installation, it is necessary to verify that the cold storage equipment meets the design requirements of the project, and then proceed with specific construction and installation. During handling, care must be taken to prevent scratches on the storage panels. What are the steps for cold storage installation?

Cold Storage Solutions

1. Installation of Cold Storage Panels

Lock hooks and sealant are used to secure the cold room panels, ensuring a flat warehouse body and avoiding hollow spaces. After the panels are installed, adjust the flatness of the upper and lower panels.

2. Installation of Air Coolers

Install the cooling fan in a location with good air circulation. The air cooler should maintain a distance from the storage panels, typically greater than the thickness of the air cooler. For example, if the air cooler thickness is 0.5 meters, the distance between the air cooler and the storage panel must exceed 0.5 meters. After installation, seal any openings with sealing strips to prevent cold bridges and air leakage.

3. Installation of Refrigeration Units

Before installing the refrigeration equipment, you should decide which type of refrigeration unit to install. Generally, small cold rooms are equipped with fully hermetic refrigeration units, while medium to large cold rooms are equipped with semi-hermetic units. After installation, a matching oil separator must be installed and an appropriate amount of oil added. If the preset temperature is below -15°C, refrigeration oil should also be added. Additionally, vibration-damping rubber mounts should be installed at the base of the compressor, and sufficient maintenance space should be reserved for servicing and inspection. Professional cold storage engineering companies place great emphasis on the overall layout of the units; colors should be uniform, and the installation structure for each model should remain consistent.

Refrigeration Equipment

4. Installation of Refrigerant Piping

The pipe diameter must meet the design and usage requirements of the cold room, and maintain proper distances from each piece of equipment. The installation position should also be adjusted according to actual site conditions.

5. Installation of Electrical Control System

Each connection point must be labeled for future maintenance and testing; therefore, wires must be secured with binding wire. Moisture-proofing measures must be implemented to prevent water from entering the wires and causing short circuits.

6. Commissioning of the Cold Room

During commissioning, confirm that the power supply voltage is normal. In many cases, users request repairs because the cold room is started with unstable voltage. Then check the on/off status of the equipment and inject refrigerant into the liquid receiver. Next, run the compressor. Check whether the compressor operates normally, whether the power supply is stable, and after reaching the set temperature, inspect the operation of all components. Once everything is normal, the commissioning is complete, and the cold storage engineering company submits the commissioning report to the user for confirmation.

Company Profile:

Senbin Holdings provides services related to the steps for cold storage installation. The company's main business scope includes: cold storage after-sales maintenance, cold storage investment and operation, cold chain planning and design, cold room investment and operation, cold room installation and construction, and cold room refrigeration equipment. The company's core advantages: direct shipment from the source factory, worry-free after-sales service, transparent pricing, and full-chain service. If you would like to learn more about industry-related questions, such as: What are the requirements for cold room installation? How to install an indoor cold room? How to install a cold storage warehouse? What is the typical temperature of a cold room? What are the operating procedures for installing a refrigerated container? For detailed information on these and other industry-related topics, please feel free to contact us. Senbin Holdings is at your service!