Contact Us
Senbin Holding (Hubei) Co., Ltd.
Group Headquarters · Contact Information
Address: 13F, Xinsite Industrial Park, Qixiong Road, Dongxihu District, Wuhan, China
Tel: +86-13377865336 (Manager Shen) +86-400 009 9929
You are here: Home / News / Media News
Senbin Holding (Hubei) Co., Ltd.
Group Headquarters · Contact Information
Address: 13F, Xinsite Industrial Park, Qixiong Road, Dongxihu District, Wuhan, China
Tel: +86-13377865336 (Manager Shen) +86-400 009 9929
When inquiring about the price of a cold storage refrigeration unit, it's important to first clarify that the price range is broad, from a few thousand to tens of thousands of yuan. Similar to buying a car, prices vary greatly depending on brand, power, and configuration. To accurately assess the cost of a unit, the following core factors should be considered.

1. Power Rating and Cold Storage Size
The power (HP) of the refrigeration unit is the most direct factor determining price. For small cold rooms of 10-30 square meters, a 3-5 HP unit is typically used, with a relatively affordable price. For medium-sized cold rooms of 50-100 square meters, an 8-15 HP unit is required, and the price increases accordingly. For large cold rooms over 200 square meters, screw compressor units of 20 HP or more are generally needed, sometimes in parallel configurations, significantly raising the cost.
2. Compressor Type and Brand
The compressor is the "heart" of the refrigeration unit, and its type and brand greatly influence the price. The mainstream compressors on the market are scroll, reciprocating, and screw types. Scroll compressors are quiet and suitable for small cold rooms, with a relatively affordable price. Reciprocating compressors offer good stability and are often used in medium-sized cold rooms. Screw compressors are designed for large cold rooms, offering high efficiency but at a higher cost. In terms of brand, well-known brands (such as Copeland, Bitzer, etc.) are typically 30% to 40% more expensive than leading domestic brands due to their mature technology and low failure rates.
3. Condensing Method
The heat dissipation method of the refrigeration unit is mainly divided into air-cooled and water-cooled. Air-cooled units are easy to install, requiring no additional cooling tower or water pool, making them suitable for areas with water scarcity, but they are usually 10%-20% more expensive than water-cooled units of the same capacity. Although water-cooled units have higher initial installation costs, they provide better cooling performance and are more suitable for hot and humid southern regions or large cold rooms.
4. Market Price Reference
Based on current market conditions, we can provide a general price range. For a 3 HP air-cooled box-type unit commonly used in small cold rooms, the price is approximately RMB 12,000 to 25,000 per unit. For 10-15 HP units used in medium-sized cold rooms, prices typically range from RMB 30,000 to 80,000. For screw compressor units of 20 HP and above used in large cold rooms, the price per unit often exceeds RMB 100,000. Please note that these prices cover only the main equipment and do not include evaporator fans, insulated piping, electrical control systems, or installation costs.

In summary, when purchasing a cold storage refrigeration unit, it is not advisable to blindly pursue low prices or excessive power. The correct approach is to have professionals calculate the accurate "cooling load" based on the cold room area, the type of goods stored, and the target temperature, so as to match the most suitable unit. This helps avoid energy waste from an oversized unit and prevents potential hazards from overloading the equipment.
Company Profile:
Senbin Holding provides services related to cold storage refrigeration unit pricing. Our core products include: cold rooms, fresh-keeping cold rooms, controlled atmosphere cold rooms, freezer rooms, quick-freezing cold rooms, cold room shelving, small cold rooms, cold chain solutions, chemical explosion-proof cold rooms, and refrigerated cold rooms. Our advantages include competitive pricing, high quality, and professional one-stop solutions covering cold room design, installation, and construction. We prioritize service and quality as a professional cold room construction contractor. If you have further industry-related questions, such as "How much does cold storage refrigeration equipment cost?" or "How good are integrated cold room refrigeration units?", feel free to contact us anytime. Our customer service is available 24/7.
Related Recommendations:
What temperature is typically maintained in a cold storage room?
What is the difference between a cold storage room and a freezer room?
|
Previous: Which Cold Storage Manufacturer Is the Best?2026-07-29
Next: Can a Freezer Room Be Used as a Cold Storage Room?2026-07-29
|
Back to List |